Deals: Meross Smart Wi-Fi Power Strip

Share This:

Power strips are a common sight in our increasingly electronic homes. However, the Meross Smart Wi-Fi Power Strip is no simple row of outlets. This power strip gives you a versatile combo of three outlets and two USB-A ports for device charging. But that is just the beginning of what this interesting product can do.

The Smart Wi-Fi Power Strip is a full-on home automation powerhouse. Using the Meross app, you can control each of the outlets directly or with schedules that you can set up. You can even integrate this power strip to voice platforms like Siri and Alexa to trigger outlets on or off. And since it uses WiFi, there are no special hubs or accessories required to put this power strip to work right away in your home or office.

Our Deals site is offering the Meross Smart Wi-Fi Power Strip for $23.99.

Description

With extra USB ports, WiFi connectivity, and smart home support, the Meross Smart Wi-Fi Surge Protector is the next step forward for your charging setup. This innovative surge protector comes equipped with 3 AC outlets and 2 USB ports that can be individually controlled from anywhere via the Meross app. You can turn connected devices on and off, set schedules, and activate timer routines, protecting your devices and trimming down your power usage.

  • Power up to 5 devices w/ 3 AC outlets & 2 USB ports
  • Control each individual outlet from anywhere via the Meross app
  • Reduce power consumption in your home or office
  • Integrate & use voice commands w/ Amazon Alexa or Google Assistant
  • Safely power your devices w/ intelligent USB charging
  • Create & set on/off schedules as well as an auto-off timer routine for each outlet and port
  • Works with Wi-Fi you already have in your home. No hub or accessories required

Specs

  • Dimensions: 1.2″H x 9.4″L x 2.1″W
  • Input: 100-125V~, 50/60Hz, 15.0A
  • Output (outlet): 100-125V~, 50/60Hz, 10A maximum load for single outlet, 15A maximum load for three outlets
  • Output (USB port): 5V ⎓ 2.1A for single USB port, 5V ⎓ 3.1A for dual USB ports
  • Ports: 3 AC outlets and 2 USB ports
  • On/Off Button: press and hold for 5 seconds to initiate factory reset process
  • 2 LEDs
  • Power cord length: 6′
  • One internal antenna
  • Wireless standards: IEEE 802.11 b/g/n, 2.4GHz, 1T1R
  • Wireless security: Supports 64/128 bit WEP, WPA-PSK/WPA2-PSK
  • Certifications: FCC, ETL
  • Operating temperature: 32℉ to 104℉
  • Storage temperature: -40℉ to 158℉
  • Operating humidity: 10% to 90% non-condensing
  • Storage humidity: 5% to 90% non-condensing

Compatibility

  • iOS 9 or later

  • Android 4.1 or later

  • Supports Amazon Alexa, Google Home, and IFTTT

  • Requires an existing Wi-Fi network

  • Note: Samsung SmartThings and Nest compatibility will be supported soon.

 


Share This:

Leave a Reply